How to Install a Car Stereo?


On several occasions you might have wanted to hear good music on your long journeys, but never had the opportunity to get yourself arranged. However, it is time that you think ahead and get yourself a stereo and attach it to your car; then have it installed in your vehicle all by yourself.

For all the individuals, who love listening to music all the time, getting themselves to cheer up at its beat, it would be better if you also got a stereo system in your car. This would help you out to enjoy the music better and also at a higher regulated power than you could have had earlier. With this thought you might proceed to collect a stereo system to be fitted in your car, but have you any idea of how it is to be done? If not, you could be guided along the process, through which you can perform the task of installing a stereo system to your car, all by yourself.

[youtube:http://www.youtube.com/watch?v=pjrMErLoj4M]

If you have not gone about the process earlier, do not panic and follow the steps as they are guided accordingly:

  • Initially you need to fix the size of the stereo that you could fit into your car and at the same time get a rough idea yourself, about the type of stereo system you want to fit in. For beginners, it would be advisable if you got a simple system first, try your hand at it and later on move onto more complex ones.
  • The primary thing that you need to fix, after you have got what you wanted, is to check on the wiring of the system. Initially you need to get the antenna wire attached, following which you must take out the positive and then negative wires respectively. Once these have been done, pull out the black ground wire, and then reattach them all over again later on.
  • Make sure to take out the front panel, for fixing your stereo there, while the negative wire is still off, as it will assure you safe work. Push in the stereo over the mounting bracket, after the front is ready and let it remain there, until you have done your testing on it.
  • Having done these, you need to get the things to get this working perfectly, for which you must have all the necessary equipments. Having all these objects will allow you go about your task much more smoothly than you could have imagined.
  • Take note that, when you would be testing the stereo, it is necessary that you test each and every speaker of the stereo individually. On several occasions, it happens that the single wire is being fed by some more wires, or individuals trying to plug in each and every wire into their system.
  • Keep in mind, that the ground wire is to be attached with the metal at all times, and if there is a plug system then make sure that after the plug is removed, it is reattached.

Having taken care of these procedures, it is quite normal that you will have your system to function just the way you wanted it to. Hope you have a nice experience with your stereo, and cherish the thought of having fixed the system all by yourself, to help you listen to your favorite music in your car too.

Filed Under: General

Tags:

RSSComments (0)

Trackback URL

Leave a Reply

You must be logged in to post a comment.